Total Quality Solution to Hard Water Scaling

Scroll Down

The hard water and sediment resulting from it create many problems in industrial plants. H2Oelite helps you solve these problems without the need for any chemicals and in an maintenance-free, environmentally-friendly manner.


Until now, the only sure solution to this problem is the use of chemicals, sediment inhibitors or expensive water softeners. H2Oelite provides you with a complete, non-toxic and environmentally-friendly solution.

H2Oelite is an electric de-watering system installed on a water pipe. This device not only prevents the formation of lime deposits, but also destroys pre-formed precipitates. The various industries have assured it after using H2Oelite and benefiting from numerous benefits, including saving operating costs and maintenance costs.

Our H2Oelite is used in many industrial applications including cooling towers, chillers, boilers, injection molding, industrial irrigation, military bases, shipping, mines, oil wells, power plants, paper making, sewage treatment, steel making and many other industries.


Superior Performances in Various Industries 

Prevent formation of sediment. 

Reduce the disruption of machine due to the need of repairs. 

No need for chemicals.

Reduce corrosion. 

Increase the condensation cycle (saving water). 

Control algae and bacteria. 

Reduce the need for water purifiers and filters. 

Extremely high energy savings.

Increase life span on expensive industrial equipment. 

Environmental friendly

Salt and chemical-free water condition


Cost savings on labour, salt and repairs associated with water softeners

Return on Investment

Last longer than 10 years

Made in USA

Designed, engineered and assembled in the USA

Increase the equipment efficiency. 




  • Energy savings up to 30% due to heat transfer working more efficiently

  • Increase the life of Cool Pads for Evaporative Coolers

  • Eliminate costly salt and maintenance prone water softeners

Best Descaling System for Industrial

Chemical Reduction

H2Oelite can significantly reduce the need to use chemicals for the prevention of corrosion and scale. No more handling & storage of hazardous chemicals.

Reduce Corrosion

H2Oelite allows for increased cycles of concentration which naturally and gently elevates the pH of the re-circulating water, thereby rendering the water less corrosive. H2Oelite controls scaling potentials, which lessens troublesome corrosive cell formations of calcium/iron deposits on the metal surfaces. H2Oelite helps control biofilm formation where bacteria can actively attack all metal surfaces.

Increases Cycles of Concentration = Water Savings 

By allowing the conductivity levels to go higher, you may be able to raise the cycles of concentration – which will result in huge water savings.

Improves Efficiency

H2Oelite keeps heat transfer surfaces free from scale allowing systems to operate under optimal design conditions.

Prevents Scale Accumulation

H2Oelite will modify the scale-forming ions so they do not adhere to each other, the pipe walls, tubes, jets and heat transfer surfaces.

Reduces Maintenance and Downtime

H2Oelite will significantly reduce overall maintenance and downtime. Adding chemicals, balancing water chemistry and cleaning shutdowns will be greatly reduced.

Control Algae and Bacteria

H2Oelite helps control algae and bacteria by eliminating their breeding ground – limescale deposits. The modified calcium crystals and higher cycles of concentration help to reduce algae and biofilm formations.

Huge Energy Savings

The primary energy savings are a result of a decrease in energy consumption in heating or cooling applications. These savings are associated with the removal of scale formation. Just a 1/4” of scale buildup can increase energy consumption 40%.

Remove Existing Scale

Any existing scale within the system is removed within weeks and never returns. Contact us for more information on how we can prove this to you when H2Oelite is installed.

Extend Life of Capital Equipment

H2Oelite will extend equipment life dramatically, maximizing the return on capital investment.

Decrease Operating Costs

H2Oelite allows you to significantly lower your cost of operation by using less chemicals and less water, as well as reducing labor costs.

Environmentally Friendly

Discharge water regulations have made the disposal of chemically treated water a regulatory concern. H2Oelite is non-invasive and adds nothing to the water, simplifying your compliance measures.


Wastewater Treatment

Wastewater treatment plants can experience numerous benefits by using H2Oelite. In addition, tremendous savings in chemical use and in labor can be realized. There are several applications within the industry where H2Oelite is effective.

Lime/ Soda Ash Treatment

Soda ash is the most commonly used treatment for a low pH reading in a wastewater stream. It is inexpensive, safe and able to be released without EPA concern. Soda ash is raw, uninhibited scale, by nature. Slurry pumps used to push the lime slurry into the water stream are subject to lime scale buildup. The ScaleBlaster System placed on the suction side of the pumps will prevent scale deposition on the pumps.

Chlorine Injection Pumps / Pump Deposits 

The chlorine lines and pumps that are used to feed chlorine into the treatment stream become full of lime scale deposits and must be cleaned. H2Oelite will keep scale particles suspended in solution and off of the pump surfaces.

Resin Bed Calcification

The H2Oelite System will keep the calcium carbonate ions in solution, preventing the calcification of the resin bed and the formation of channels in the bed that lead to ineffective treatment.

Polymer Systems

Potential reduction of polymer usage and increased dewatering capabilities.

Effluent Systems

The H2Oelite System will protect the discharge line, keeping it free of lime scale caused by heavy concentrations of the calcium carbonate.   

Sensors & Instrumentation

The H2Oelite System benefits sensors, probes and control valves. Calcium particles remain suspended in solution and will not leave deposits on vital measuring equipment.

Mixing Tank

Using lime to treat high pH water or soda ash to treat low pH water can present some of the greatest scale control challenges in the industry. The lime or soda ash is mixed with water to form a slurry and then is pumped into the water to be treated. The mixing tank is prone to scale deposition on the sides and the mixing propeller gets scale buildup, too. The H2Oelite System can treat the water to be mixed and will keep the tank sides and propeller clear of lime scale buildup.

Sodium Bisulfate Line

H2Oelite will prevent calcium coming out of solution and plugging up the sodium bisulfite lines used to remove chlorine and control pH levels.


H2Oelite forms soft sludge instead of hard lime scale for decreased cleaning frequency and easier removal.

Sodium Hypochlorite Line 

H2Oelite will remove limescale formation in the chemical feed lines and allow for optimal flow rates throughout the disinfection system from the injector to the contact basin.

Environmental Issues

Environmental issues and the “going green” movement in the world today is a more important issue than ever before. H2Oelite is the ideal environmental product.



  • Handles up to 20" Diameter Non-Magnetic Pipe

  • Up to 14" Diameter Magnetic Recirculating Pipe

  • Up to 12" Diameter One Shot Magnetic Pipe

  • Nema 4 Enclosure

  • 3 years warranty

  • UL / CUL Certified


  • Handles up to 20" Diameter Non-Magnetic Pipe

  • Up to 14" Diameter Magnetic Recirculating Pipe

  • Up to 12" Diameter One Shot Magnetic Pipe

  • Nema 4 Enclosure

  • 3 years warranty

  • UL / CUL Certified


© 2019 by Britz YD Pvt. Ltd.

Britz YD Pvt. Ltd.

Plot No.282, Vivekananda Nagar, Peramanur, Maraimalai Nagar, Chengalpet, Kancheepuram, Tamil Nadu, 603209, India

(91) 91767 59662